Warning; Introduction; Technical Details - Sagola HT10 Manual De Instrucciones

Before starting the unit you must read, take into considera-
tion and comply with all the indications described in this
Manual.
This manual must be kept in a safe place, accessible to all
users of the unit.
The unit must be started and handled exclusively by
personnel instructed in its use and must be employed only
for the purpose for which it was designed.
This unit belongs to the family of devices designed to spray
products with compressed air by means of a spray gun. They
provide a high level of product transfer and excellent quality
finish, as well as low levels of contamination.
The equipment consists of the following standard features:
- Pump model HT 10, HT 15 or HT 25.
- Instruction manual
- Case
Unit featuring a pneumatic cylinder that activates the hydraulic
device which provides the pressure necessary to spray the
product.
Pneumatic cylinder
Unit supply
Engine stroke
Max. air consumption (60 cycles/Minute)
Maximum pressure at air inlet
Minimum Ø of supply hose
Lubricator Oil
Maximum Pressure at the product outlet
Free flow-rate (92 cycles/minute and 6 bar)
Flow-rate per cycle
Air inlet
Product Inlet
Product Outlet
MAXIMUM Spray air cap size
Weight
Dimensions: 525,93x575,8x875 mm.
Work pressure engraved on the Mix Gun
Approvals

1. WARNING

2. INTRODUCTION

3. TECHNICAL DETAILS

Ex II 2G X
- 16 -
Likewise, accident prevention standards, work centre
regulations and directives and current legislation and
restrictions must be taken into consideration at all times.
SAGOLA S.A., the SAGOLA logotypes and other SAGOLA
products mentioned in this manual are registered trade-
marks or brand names of the company SAGOLA S.A.
As optional and complementary elements of the equipment,
in this Manual the following are included:
- Product hoses
- Mixed Gun
- Airless Gun
- Spray air caps:
- Fixed Spray Fan
- Rotational (Self-cleaning)
- Mixed
The unit is supplied with a suction probe, which is inserted
directly in the container of the product to be applied.
HT10 HT15
ø135 mm. ø150 mm.
Treated Compressed Air
42 mm.
646 L/min. 800 L/min.
6 bar
6 mm. (1/4")
SAE 10
60 bar 90 bar
9,75 L/min.
105 c.c.
Quick plug BSP 1/2"
Tube ø12xø21
3/8" - 1/4" GAS BSP M
0.018"
41 Kg 42 Kg
HT25
ø200 mm.
987 L/min.
149 bar
45 Kg