JVC KD-T801BT Manual De Instrucciones página 20

BLUETOOTH®
The following operations may differ or be unavailable depending on the
connected phone.
To On the faceplate
First incoming call...
Answer a call
Press
KD-T801BT/KD-T709BT: * ENTER
KD-T706BT/KD-T702BT: Volume knob
Reject a call
Press and hold
KD-T801BT/KD-T709BT: * ENTER
KD-T706BT/KD-T702BT: Volume knob
End a call
Press and hold
KD-T801BT/KD-T709BT: * ENTER
KD-T706BT/KD-T702BT: Volume knob
While talking on the first incoming call...
Answer another incoming
Press
call and hold the current
KD-T801BT/KD-T709BT: * ENTER
call
KD-T706BT/KD-T702BT: Volume knob
Reject another incoming
Press and hold
call
KD-T801BT/KD-T709BT: * ENTER
KD-T706BT/KD-T702BT: Volume knob
While having two active calls...
End current call and
Press and hold
activate held call
KD-T801BT/KD-T709BT: * ENTER
KD-T706BT/KD-T702BT: Volume knob
Swap between the
Press
current call and held call
14
ENGLISH
or the following button.
or the following button.
or the following button.
or the following button.
or the following button.
or the following button.
.
Adjust the phone volume*1 Perform the following operation during a call.
[00] to [35] (Default: [15]) KD-T801BT/KD-T709BT: Press VOL +/– *2
KD-T706BT/KD-T702BT: Turn the volume knob
Switch between hands-free
Press
and private talk modes*3
*1 This adjustment will not affect the volume of the other sources.
*2 Press and hold VOL + to continuously increase the volume to 15.
*3 Operations may vary according to the connected Bluetooth device.
Improve the voice quality
While talking on the phone...
1
Press and hold .
2
Perform 'Select an item (page 3 or 4)' operation to select an
item (see the following table).
3 Repeat step 2 until the desired item is selected or activated.
4 Press to exit.
To return to the previous setting item, press
[MIC GAIN] [LEVEL –10] to [LEVEL +10] ([LEVEL –04]): The sensitivity of the
microphone increases as the number increases.
[NR LEVEL] [LEVEL –05] to [LEVEL +05] ([LEVEL 00]): Adjust the noise reduction
level until the least noise is being heard during a phone conversation.
[ECHO CANCEL] [LEVEL –05] to [LEVEL +05] ([LEVEL 00]): Adjust the echo cancellation
delay time until the least echo is being heard during a phone conversation.
during a call.
.
Default: [XX]