Apex Pro-CARE 4 Manual De Uso página 10

English
3. INSTALLATION
3.1 Pump & Mattress Installation
Unpack the box and then inspect for any damage which may have occurred during shipment. If
there are any damages, please contact your dealer immediately.
1. Place the mattress or pad on top of a bed frame.
There are securing straps on the base of the
mattress. Secure the mattress firmly by fixing the
straps to the bed frame, ensure that moving
sections of the bed are still free to move. Please
note for the foot end.
2. Hang the pump onto the footboard and adjust
hangers so the pump is secured in an upright
position; or place the pump on a flat surface.
3. Connect air hose connectors from air mattress to
the pump unit. A "click" sound will be heard when
connection is completed and secured.
NOTE: Check and ensure the air hoses are not
kinked or tucked under mattress.
4. Plug the power cord into electrical outlet.
NOTE: Make sure the pump unit is suitable for
the local power voltage. Remove the
plug can disconnect the device. Do not
position the equipment so that it is
difficult to operate the disconnecting
device.
5. Then turn the main power switch to ON position.
CAUTION: The pump should only be used with
the mattress recommended by the
manufacturer. Do not use it for any
other purpose.
8