Apex Pro-CARE 4 Manual De Uso página 11

English
NOTE: For transport and power outages, use the transport cap to
keep air in the sub-matt. If the mattress was fully inflated
after power up, in case of power failure, the mattress will
remain inflated for 4- 8 hours depending on the level of
inflation. To slow deflation, detach connector hose from the
control box and connect the transport cap to the hose.
Ensure that CPR knob is properly closed.
Installation tips are listed below:
After installation, the extra length of the power cord, if any, should be neatly arranged to avoid any
tripping accidents. The EQUIPMENT should be firmly placed at position where users/doctors can
access easily.
9