Pioneer SX-N30AE Manual De Instrucciones página 5

> Before Start > Part Names
diameter).
16.DIRECT button: Selects the listening mode. The mode
changes Direct # Pure Direct # Stereo each time you
press the button.
17.BASS dial: Adjusts the bass.
18.TREBLE dial: Adjusts the treble.
19.BALANCE dial: Adjusts the balance of the sounds
output from the left and right speakers.
20.RT/PTY button: Used when receiving stations
transmitting text information (P21).
21.SPEAKERS A/B button: Select the terminals to output
audio from between SPEAKERS A/B.
22.USB jack: A USB storage device is connected so that
music files stored in it can be played. You can also
supply power (maximum 5 V/0.5 A) to USB devices
with a USB cable.
0 When connecting a HDD that requires more than 5
V/0.5 A, connect to the USB port (maximum 5 V/1 A)
on the rear of the unit.
> Install > Initial Setup
  
Display
1. This may light when performing operations with the "NET" input
selector.
2. Lights in the following conditions.
: When connected via BLUETOOTH
: When connected by Wi-Fi
NET: When "NET" is selected with the input selector and the unit is
connected to the network. It will flash if the connection to the network is
not correct.
USB: When "NET" is selected with the input selector and the unit is
connected by USB and the USB device is selected. Flashes if the USB
is not properly connected.
DIGITAL: Digital signals are input and the digital input selector is
selected.
3. Lights according to the type of input digital audio signals.
4. Lights in the following conditions.
RDS: Receiving RDS broadcasting.
TUNED: Receiving AM/FM radio
STEREO: Receiving FM stereo.
SLEEP: Sleep timer has been set.
AUTO STBY: Auto Stby (P28) has been set.
5. Ë: Lights when headphones are connected.
6. Flashes when muting is on.
7. Displays various information of the input signals.
8. Lights while adjusting the volume.
9. Speaker/Channel display: Displays the output channel of the speakers.
> Playback
Supplementary information | Advanced Setup | Others
 
  
En 5