Safety Instructions; Troubleshooting; Environmental Conditions - Microson m2 BTE AT Manual De Uso

SAFETY INSTRUCTIONS
WARNING!
• Batteries are dangerous if swallowed. Keep
batteries out of the reach of children or mentally
disabled persons.
• Please check before using your hearing aid in areas
with restrictions for electronic or wireless devices
(for example, on airplanes).
• Never use your hearing aids in places where there is
medical equipment (X-ray, high frequency, magnetic
resonance or short-wave therapy treatments).
• Do not use a hearing aid in areas where there is a
risk of explosion or in oxygen-rich environments!
• Stay away from strong electromagnetic fields.
• People with pacemakers or magnetic valves should
maintain their hearing aids at a minimum distance of
15 cm. If you detect any interference, please read the
safety instructions provided by the manufacturer of
the implant. Metal detectors and alarms may cause
interference or unexpected sounds.
• m2 BTE / m2 BTE P hearing aids can generate sound
output levels in excess of 132 dB SPL.
CAUTION!
• Protect your hearing aids against moisture and
sources of heat.
• Do not use your hearing aids while showering,
swimming or spraying your hair.
• Protect your hearing aids from hard knocks.
• Never use a microwave or other heating devices to
dry your hearing aids.
EN
32
SYMPTOM POSSIBLE CAUSE
Spent battery.
The hearing aid
does not work
Defective hearing
Mould or adapter
Volume too low. blocked or
obstructed
Distorted or
Spent battery
unclear sound
Manufacturer's customer service:
NOTE
For any other problems or queries, please contact your hearing
care specialist or retailer.
ENVIRONMENTAL CONDITIONS
TEMPERATURE
LIMIT
HUMIDITY
LIMITATION
33

TROUBLESHOOTING

SOLUTION
Replace battery.
Consult your
hearing care
aid
specialist.
Remove the
obstruction and
clean the adapter
or mould.
Replace battery
+34 93 300 58 00
helpdesk@microson.es
STORAGE AND
OPERATING
TRANSPORT
0 - 40 °C -20 to 60 °C
10 - 95 % (non-condensing)
EN