Setting The Demo Mode; Selecting The System Language; Selecting The Using Location; Setting The Keyboard Language With The Application For Iphone - Pioneer AVH-X7850BT Manual De Instrucciones

System settings
p Immediately verify whether the display changes to a
rear view camera image when the gearstick is moved to
REVERSE (R) from another position.
p When the screen changes to full-screen rear view camera
image during normal driving, switch to the opposite setting
in "Camera Polarity".
p If you touch while the camera image is displayed, the
displayed image will turn off temporarily.
Setting rear view camera activation
The default setting is "Off".
1 Display the "System" setting screen.
 Refer to Displaying the "System" setting screen on page
39
2 Touch [Camera settings].
3 Touch [Back Camera Input] to switch "On" or
"Off".
Setting the polarity of the rear view
camera
p This function is available when "Back Camera Input" is
"On".
 Refer to Setting rear view camera activation on page 40
1 Display the "System" setting screen.
 Refer to Displaying the "System" setting screen on page
39
2 Touch [Camera settings].
3 Touch [Camera Polarity].
 Battery (default):
The polarity of the connected lead is positive.

Ground:
The polarity of the connected lead is negative.

Setting the demo mode

1 Display the "System" setting screen.
 Refer to Displaying the "System" setting screen on page
39
2 Touch [Demo Mode] to switch "On" or "Off".
40

Selecting the system language

 If the embedded language and the selected language setting
are not the same, text information may not display properly.
 Some characters may not be displayed properly.
1 Display the "System" setting screen.
 Refer to Displaying the "System" setting screen on page
39
2 Touch [System Language].
3 Touch the language.
After the language is selected, the previous screen returns.

Selecting the using location

X7850BT X6850DVD
p This setting is not available while using the Pandora.
1 Display the "System" setting screen.
 Refer to Displaying the "System" setting screen on page
39
2 Touch [Location Setting] to switch the follow-
ing items.
 South America (default)
 Australia
Setting the keyboard language
with the application for iPhone
You can use the keyboard in AppRadioMode by setting the
language of the keyboard for iPhone.
p This function is only available in AppRadioMode on the
iPhone.
1 Display the "System" setting screen.
 Refer to Displaying the "System" setting screen on page
39
2 Touch [Keyboard].
3 Touch the language.
After the language is selected, the previous screen returns.
Adjusting the response posi-
tions of the touch panel (touch
panel calibration)
If you feel that the touch panel keys on the screen deviate from
the actual positions that respond to your touch, adjust the
response positions of the touch panel screen.
p This setting is available only when you stop your vehicle in a
safe place and apply the handbrake.
p Do not use sharp pointed tools such as a ballpoint or
mechanical pen, which could damage the screen.
p Do not turn off the engine while saving the adjusted position
data.
1 Display the "System" setting screen.
 Refer to Displaying the "System" setting screen on page
39
2 Touch [Touch panel calibration].
3 Touch [Yes].
4 Touch two corners of the screen along the
arrows, and then touch the centres of two +
marks at the same time twice.
5 Press .
The adjustment results are saved.
6 Press once again.
Proceed to 16-point adjustment.
7 Gently touch the centre of the "+" mark dis-
played on the screen.
The target indicates the order.
 When you press , the previous adjustment
position returns.
 When you press and hold , the adjustment is
cancelled.
8 Press and hold .
The adjustment results are saved.

Setting the dimmer

Setting the dimmer trigger
p This setting is available only when you stop your vehicle in a
safe place and apply the handbrake.