Starting Procedure; Selecting Song Or Video Sources From The Playlist Screen; Using This Product's Ipod Function From Your Ipod; Selecting A Song From The List Related To The Song Currently Playing (Link Search) - Pioneer AVH-X7850BT Manual De Instrucciones

iPod
p The available sources vary depending on the selected
method for connecting your device.
 Refer to Information on the connections and functions for
each device on page 19
CAUTION
For safety reasons, video images cannot be viewed while your
vehicle is in motion. To view video images, stop in a safe place
and apply the handbrake.

Starting procedure

1 Connect your iPod.
 Refer to Connecting your iPod on page 29
The source changes and then playback will start.
p When connecting an iPhone or iPod touch, quit all applica-
tions before connecting the device.
2 Display the "AV source selection" screen.
3 Touch [iPod].
Selecting song or video sources
from the playlist screen
You can search for the song or video you want to play from the
playlist screen.
1 Touch .
2 Touch or to switch the music or video
category list.
3 Touch the category.
If you use English as the system language, the alphabet search
function is available. Touch the initial search bar to use this
function.
4 Touch the title of the list.
If you can not find the desired song or video, try to search again
according to the above steps.
5 Start playback of the selected list.
p Depending on the generation or version of the iPod, some
functions may not be available.
p You can play playlists created with the MusicSphere applica-
tion. The application is available on our website.
30
Using this product's iPod func-
tion from your iPod
You can control this product's iPod function from the iPod on
"App Mode". The application screen of the iPod can be dis-
played on this product, and the music files and video files are
played back with this product.
p This function is not available when using iPod function with
an iPhone 6 Plus, iPhone 6, iPhone 5s, iPhone 5c, iPhone 5,
or iPod touch (5th generation).
p While this function is in use, the iPod will not turn off even if
the ignition key is turned off. Operate the iPod to turn off the
power.
1 Touch .
2 Operate the connected iPod to select a video or
song and play.
p Some functions are still accessible from this product even if
the control mode is set to "App Mode". However, the opera-
tion will depend on your applications.
p Touch to switch the control mode.
Selecting a song from the list
related to the song currently
playing (link search)
p If you touch the artwork, the list of songs in the album is
displayed.
1 Touch song information to open the list of
songs.
2 Touch the song to play back.

AppRadioMode

Displays the launcher
application screen.
Displays the previous screen.
AppRadio Mode
Abcdefg Abcdefg Abcdefg
Displays the current source.
Displays the menu screen.
p Press the DISP button to hide the App control side bar. Press
the DISP button again to display it again.
and are not available depending on the type of
p
device.
WARNING
Certain uses of an iPhone or a smartphone may not be
legal while driving in your jurisdiction, so you must be
aware of and obey any such restrictions.
If in doubt as to a particular function, only perform it
while the car is parked.
No feature should be used unless it is safe to do so
under the driving conditions you are experiencing.

Using AppRadioMode

You can control applications for an iPhone or a smartphone
directly from the screen (AppRadioMode).
In AppRadioMode, you can operate applications with finger
gestures such as tapping, dragging, scrolling or flicking on the
screen of this product.
p The compatible finger gestures vary depending on the
application for an iPhone or a smartphone.
Abcdefg Abcdefg
21 48
6/10