Theme Settings; Audio Settings - Pioneer AVH-Z5050TV Manual De Instrucciones

Theme settings

The menu items vary according to the source.
Menu Item Description
[Background] Select the wall paper from the preset items in this product
[Home] [AV] or original pictures via the external device.
The wall paper can be set from selections for the top menu
screen and AV operation screen.
Preset Display Select the desired preset background display.
(custom)*1 Displays the background display image imported from the
external storage device.
(off ) Hides the background display.
[Illumination]*2 Select an illumination colour from the colour list or create a
defined colour.
Coloured Keys Select the desired preset colour.
(custom) Displays the screen to customise the illumination colour.
To customise the defined colour, touch
or
and blue to create favourite colour.
To store the customised colour in the memory, touch and
hold [Memo], and the customised colour will be available
at the next illumination setting by pressing
TIP
You can also adjust the colour tone by dragging the colour bar.
(rainbow) Shifts gradually between the preset colours in sequence.
[Theme]*2 Select the theme colour.
[Clock] Select the style of the clock from the preset image.
Preset Images Select the desired preset style for the clock.
(off ) Hides the clock display.
*1 Refer to Still image source (page 30).
*2 You can preview the top menu screen or the AV operation screen by touching [Home] or [AV]
respectively.

Audio settings

The menu items vary according to the source. Some of the menu items become
unavailable when the volume is set to mute.
44
En
then touch
to adjust the brightness and the level of red, green
Menu Item
[Graphic EQ]
[Super Bass] [Powerful]
[Natural] [Vocal] [Flat]
[Custom1] [Custom2]
[Fader/Balance]
.
[Mute Level]
[ATT]
[Mute]
[Off]
Description
Select or customise the equaliser curve.
Select a curve that you want to use as the basis of
customising then touch the frequency that you want to
adjust.
TIPS
• If you make adjustments when a curve [Super Bass], [Powerful],
[Natural], [Vocal], or [Flat] is selected, the equaliser curve settings
will be changed to [Custom1] mandatorily.
• If you make adjustments when the [Custom2] curve is selected
for example, the [Custom2] curve will be updated.
• [Custom1] and [Custom2] curves can be created common to all
sources.
• If you trail a finger across the bars of multiple equaliser bands,
the equaliser curve settings will be set to the value of the
touched point on each bar.
Touch or to adjust the front/rear speaker balance.
Set [Front] and [Rear] to [0] when using a dual speaker
system.
Touch or to adjust the left/right speaker balance.
TIP
You can also set the value by dragging the point on the displayed
table.
NOTE
Only the balance can be adjusted when [Network Mode] is
selected as the speaker mode.
Select mute or attenuate the AV source volume and iPhone
or smartphone application volume when the navigation
outputs the guidance voice.
The volume becomes 20 dB lower than the current volume.
The volume becomes 0.
The volume does not change.