Starting Procedure; Adjusting The Volume; Setting The Auto-Launch Function - Pioneer AVH-Z5050TV Manual De Instrucciones

The system setting screen appears.
3
Touch [Driving Position].
4
Touch the item.
[Left]
Select for a left-hand drive vehicle.
[Right]
Select for a right-hand drive vehicle.

Starting procedure

1
Connect an Android Auto™ compatible device to this product via USB.
2
Press .
3
Touch .
4
Touch [Android Auto].
5
Touch Android Auto icon in the tab.
The application screen appears.
TIP
You can use voice recognition function by pressing
NOTES
• When the device for Android Auto is connected to this unit, the device is also connected via
Bluetooth at the same time. If five devices are already paired, the message confirming whether to
delete the registered device is displayed. If you want to delete the device, touch [Agree]. If you want
to delete other device, touch [BT Settings] and delete the devices manually (page 11).
• If Android Auto is turned on during a call on a mobile phone other than the Android Auto compatible
device, the Bluetooth connection will switch to the Android Auto compatible device after the call.
• Refer to Smartphone (Android device) (page 58) for details on connecting a device to this product.

Adjusting the volume

You can adjust the guidance volume separately from the main sound volume when
Android Auto is used.
1
While Android Auto is activated, press VOL (+/-).
The volume menu will be displayed on the screen.
once Android Auto is activated.
Touch to mute. Touch again to cancel mute.
Touch [+]/[-] to adjust the guidance volume.
Displays the main sound volume. To adjust the main sound volume, press
VOL (+/-) on the unit or touch [+]/[-].
NOTE
The volume menu is displayed for four seconds. If the menu disappears, press VOL (+/-) again. The
menu reappears.

Setting the auto-launch function

If this function is set to on, Android Auto will launch automatically when an Android
Auto compatible device is connected to this product.
NOTE
Android Auto will launch automatically only when an Android Auto compatible device is correctly
connected to this product.
1
Press .
2
Touch then .
3
Touch [Android Auto Auto-launch] to switch [On] or [Off].
53
En