Other Functions; Setting The Time And Date; Changing The Wide Screen Mode; Restoring This Product To The Default Settings - Pioneer AVH-Z5050TV Manual De Instrucciones

Other functions

Setting the time and date

1
Touch the current time on the screen.
2
Touch or to set the correct time and date.
You can operate the following items: Year, month, date, hour, minute.
TIPS
• You can change the time display format to [12hour] or [24hour].
• You can change the order of date display format: Day-month, Month-day.

Changing the wide screen mode

You can set the screen mode for AV screen and image files.
1
Touch the screen display mode key.
Screen display mode key
2
Touch the desired mode.
[Full] Displays 16:9 images on the full screen without changing the ratio.
NOTES
• Images other than 16:9 images for DVD may be displayed in the full screen with
the ratio change.
• Enlarges and displays images of USB sources keeping the ratio of the original
source image.
50
En
[Zoom] Displays the images enlarging them vertically.
[Normal] Displays images without changing the 4:3 aspect ratio.
NOTES
• For USB sources, 4:3 aspect ratio may not be displayed.
• Devices connected with USB MTP are not supported.
[Trimming] An image is displayed across the entire screen with the horizontal-to-vertical ratio
left as is. If the screen ratio differs from the image, the image may be displayed
partly cut off either at the top/bottom or sides.
NOTE
[Trimming] is for image files only.
TIPS
• Different settings can be stored for each video source.
• When a video is viewed in wide screen mode that does not match its original aspect ratio, it may
appear different.
• The video image will appear coarser when viewed in [Zoom] mode.
NOTE
Image files can be set to either [Normal] or [Trimming] in wide screen mode.

Restoring this product to the default settings

You can restore settings or recorded content to the default settings from [Restore
Settings] in the [System] menu (page 42).