Basic Operations; Opening The Cover; Closing The Cover; Taking Off The Cover - WEG FSW 250 Manual De Instrucciones

www.weg.net

1. BASIC OPERATIONS

1.1. OPENING THE COVER

Take the handle and open the cover up to firm resistance (Figure 1).
g

1.2. CLOSING THE COVER

Take the handle and close the cover up to firm resistance (Figure 2);
g
Move the cover along the base of the disconnector and then take off the cover (Figure 3).
g

1.3. TAKING OFF THE COVER

Open the cover (acc. to chapter 1.1);
g
Move the cover along the base of the disconnector and then take off the cover (Figure 3).
g

1.4. MOUNTING THE COVER

Insert the cover into the base of disconnector and then move the cover along the base
g
of disconnector up to firm resistance (Figure 4).

1.5. TAKING OFF THE SHIELD FOR TERMINALS

Take selected shield for terminals (Figure 5) and deflect by a screwdriver one of the
g
fasteners of the shield (Figure 6) 1 and then deflect the second fastener of the cover
(Figure 7) 2 and at the same time withdraw selected shield for terminals from the base
(Figure 8).
12 Instruction manual for mounting and service of fuse switch disconnectors
Figure 1
Figure 3
Figure 2
Figure 4