the dual voltage
(For machines having the dual voltage function only)
The dual voltage washing machine can work at the voltage of 220V or 120V to
meet needs of different countries and areas.
convert the voltage from
220V50Hz to 120V60Hz :
1.
Unplug the washing machine
supply.
2.
Remove the back cover.
3.
Take down the nylon clip, and
remove the plastic bag.
4.
Connect the Wash120V of the
terminal connector with "Wash",
"Spin120V" with "Spin" ,
the voltage can be converted to
"120V60Hz".
5.
Put the wires in order, wrap
them in the plastic bag, and
washing machine can be
powered for operation.""
attention to maintenance
cabinet maintenance
After using the washing machine, wipe the moisture and stain on it with
a piece of soft cloth. To avoid damage to the surface, do not use
corrosive or volatile chemicals.
If convert the voltage from
120V60Hz to 220V50Hz:
1.
Unplug the washing machine
supply.
2.
Remove the back cover.
3.
Take down the nylon clip, and
remove the plastic bag.
4.
Connect the "Wash 220V" of the
terminal connector with "Wash",
"Spin 220V" with "Spin"
then
convert the voltage to
220V50Hz.
5.
The step 5 is the same as above
In the step 4 above, should
connect the terminal
connectors of both wash and
spin, and make sure to connect
correctly.
*The factory-set voltage is
"220V50Hz". Users can chose
the voltage according to the
regional voltage range.
44
to