Troubleshooting - mabe WMT134PEWWW0 Instructivo De Instalación

47
maintenance
•
Do not connect to the hot water supply.
•
After using, be sure to unplug the power plug.
•
Be sure to use plug that is properly grounded.
•
The maximum gradient of the supporting surface for the washing
machine should not exceed 2ºC.
•
Do not tear down electrical wires and components in the machine by
yourself.
•
There are holes on the base for ventilation. These holes should not be
blocked by foreign objects (carpets, etc.).
•
Never connect the grounding wire with the live wire, or it may lead to an
electric shock.
•
If the power cord is damaged, it must be replaced by a qualified person
to avoid a hazard.
If the following symptoms occur, please disconnect the power plug
and perform the following checks:

troubleshooting

symptom
the washing
machine does not
work.
the drain hose
does not work.
there is abnormal
noise during
washing.
there is abnormal
noise and violent
vibration during
spinning.
reason
•
Check that the power supply is in good condition.
•
Check that the power plug is inserted properly.
•
Check that the wash timer knob or the spin timer
knob is not in the "0" position.
•
Check that the drain hose is not laid too high.
•
Check that the drain hose is not frozen.
•
Check that the drain hose is not blocked by
foreign matter.
•
Check that there are no coins or any other foreign
objects dropped into the wash tub.
•
Check that the washing machine is placed on flat,
stable floor.
•
Check that clothes are evenly distributed in the
spin tub.
•
Check that there are no washing materials or
foaming debris dropped into the outside of the
spin tub.