Objects Dropped - mabe WMT134PEWWW0 Instructivo De Instalación

objects dropped

operation when objects are dropped into the outside of the spin
1.
Remove all screws on the frame with a screw driver and loosen the
connector of the brake belt .
2.
Pull up the frame with both hands and turn it backwards.
3.
Take out the clothes dropped into the outside of the spin tub.
4.
Fasten the connector of the brake belt , Press the frame to reset and
tighten screws.
CAUTION:
AFTER YOU USE THE WASHING MACHINE, NEVER FORGET
TO DO THE FOLLOWING TWO THINGS:
DISCONNECT THE POWER PLUG.
•
REMOVE THE WATER INLET HOSE.
•
notes:
•
The washing machine employs
alternative current with rated
voltage and frequency .
•
When voltage fluctuates
between -10% and 10% of the
rated voltage, the machine can
work normally.
•
Connection mode of the power
cord of this machine is Y-shaped
connection.
Frame
Cabinet
•
Users should not detach or
reconnect the wire by
themselves. If this part needs to
be repaired, please contact the
designated service center.
46