Attention To Installation; Lay Upper Drain Hose; Change The Position Of The Drain Hose; Installation Site - mabe WMT134PEWWW0 Instructivo De Instalación

35

attention to installation

lay upper drain hose.

•
Needs a drain hose with
minimum diameter 3 cm, and
minimum carry away capacity of
40 liters per minute.
•
For upper drain system, the
drain hose must be placed at
least 86 cm(30 inches) from the
bottom of washer , but not
higher than 100 cm.

change the position of the drain hose

The ex-factory installation position of the drain hose is located the spin
side . According to the installation site, the drain hose can also be
installed at the wash side of the machine .
The method is as follows:
1. Unplug the power cord and
empty water in the drain hose
completely.
2. Spread a piece of soft cloth on
the floor (e.g. a blanket) and
place the washing machine on
it gently.
3. Take the drain hose out from
the buckle at the spin side, and
put it into the buckle at the
wash side.

installation site

In order to avoid electrical failure, discoloration and deformation, do
not install the machine in the following places:
•
Locations exposed
to direct sunlight.
For upper drain system only
4.
Hang up the drain hose kit.
Blanket
Drain hose
Buckle
For lower drain system only
• •
Locations exposed
to rain or snow.
Front
Locations with
uneven or unstable
ground.