Power On / Off
Connecting the AC cord plug to the Display.
Connecting the plug to the Wall Outlet
Notes:
• Main plug types vary between countries. The power
plug shown at right may, therefore, not be the type
¿ tted to your set.
• When disconnecting the AC cord, be absolutely
sure to disconnect the AC cord plug at the socket
outlet ¿ rst.
Press the Power switch on the Display to turn the
set on: Power-On.
Power Indicator: Green
Press the
Power Indicator: Red (standby)
Press the
Power Indicator: Green
Turn the power to the Display off by pressing the
the Display is on or in standby mode.
Note:
During operation of the power management function, the power indicator turns
orange in the power off state.
button on the remote control to turn the Display off.
button on the remote control to turn the Display on.
Power Indicator
Remote Control Sensor
switch on the unit, when
Power switch
9