Important Notice; Safety Measures; General Information - UFESA BE1520 Manual De Instrucciones

ENGLISH

IMPORTANT NOTICE

Read the instructions carefully before
using the product. Keep them in a
safe place for future reference.

SAFETY MEASURES

- This device is intended solely for domestic use.
- Remove the batteries from the product if it is not going to be used for a
long time.
- Keep this device out of the reach of children and people with disabilities.
- Do not move the device while it is in use.
- Do not exceed the weighing capacity of the device.
- Do not use the device with wet feet.
- Do not store the device in upright position.
- Do not store the device with cracked or broken glass.
- Improper use of the product may cause risks and revoke the guarantee
and liability.
B&B TRENDS SL accepts no liability for any damage to people, animals or
objects as a result of not observing these warnings.

GENERAL INFORMATION:

We would like to thank you for choosing UFESA. First check that the
appliance is complete and undamaged. Contact the store where you
purchased the product in the event of any doubt.
With your purchase you have acquired:
•1 UFESA BE1520 scale
INSTRUCTIONS FOR USE
The safety instructions marked at the beginning of this manual must be
followed at all times when using this product.
Follow the instructions below in order to switch on the appliance:
1. Remove the product from its original packaging taking special care not to
damage any of its parts. Do not use excessive force to remove the product
from the box.
2. Remove the cover of the batteries on the back of the scale.
3. Place the batteries in the right place under the cover following the
indicated polarity, that is, placing the positive "+" facing out.
4. Put the cover back on.
5. Place the device on a hard, rigid, flat, stable horizontal surface free of
vibration
6. Prepare the apparatus according to the unit weight, kg/lb selecting the
weight units kg/lb/st pressing the button on the back of the scale, marked
with the word "UNIT"
7. Gently place your feet on the surface of the scale to start the device and
wait for the symbol "0.0" to appear on the screen.
5