Prewash (Water Jet) - Samsung WA50M7450A Serie Manual De Usuario

Ocultar thumbs Ver también para WA50M7450A Serie:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

PREWASH (WATER JET)

Water Jet helps you hand wash before the washing machine starts operation. Water Jet is available only
when the door is open with the water level set to less than High.
1. Open the door.
2. Press the Water Jet button to supply water.
3. Hand wash your item.
If you want to hand wash while the machine is operating,
press the Start/Pause button to stop operation, and
then follow steps 1-3 above.
Water Jet stops
Water Jet stops operation automatically when the washing machine detects the maximum
water level.
Water Jet stops operation automatically 5 minutes after it begins. To add more water, press
the Water Jet button again to resupply water.
Water Jet drains
Select a cycle and press the Start/Pause button. Then the washing machine drains the
water to be used during the prewash.
When the washing machine is turned off before starting the wash cycle, it drains the water
to be used during the prewash. However, when it is turned off during the wash cycle, it does
not drain the water.
Water Jet extracts the water through the Mist Shower nozzle for 1 second and then through the Water
Jet nozzle from then on when it is fi rst activated after the washing machine turns on.
Do not abuse Water Jet. Excessive use of Water Jet increases water consumption.
Do not block the outlet of Water Jet with hands. Water may leak outside the tub, causing a
CAUTION
system failure.
Due to a diff erence in air pressure, Water Jet may splash water from its outlet when it is fi rst
activated.
WA7000M_DC68-03774A-03_EN.indd 25
WA7000M_DC68-03774A-03_EN.indd 25
English - 25
4/12/2018 3:43:40 PM
4/12/2018 3:43:40 PM

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Wa45m7050a serieWa50n7350a serieWa45n7150a serie

Tabla de contenido