Briggs & Stratton SNAPPER XD 20SPWM48 Manual Del Propietário página 28

MAINTENANCE
VERTICAL STORAGE FUNCTION (See Figure 13)
• Remove the battery from the mower. Remove the grass catcher bag.
• Rotate the handle knobs to the unlocked position.
• Lower the handle assembly and rotate the handle knobs to the locked
position.
• Lift the mower by the front end to the vertical position.
W A R N I N G
Always remove the battery from the mower before placing the unit in the
vertical storage position.
STORAGE SWITCH:
When the handle is rotated into the fully locked storage position, the mower
is equipped with a storage switch (1) that will disable the mower from
running in the storage position. The storage switch (1) does not replace the
need to remove the safety key and battery to prevent accidental start-up or
unauthorized use.
(1)
Fig. 13
28