Replacing The Fluorescent Lamp; Replacing The Display Lamps - NAMCO SPIN THE SPIN Manual Del Operador

7-7 Replacing the Fluorescent Lamp

1. Remove the front window
2. Remove the fluorescent lamp by unscrewing it anti clockwise from the
lamp holder.
3. Replace the fluorescent lamp. (230v 11watt)
4. Reassemble in reverse order.
Note: When replacing the fluorescent lamp, always use a fluorescent
lamp of the same rating. Failure to do so may cause heat damage to
the plastics within the vicinity of the fluorescent lamps

7-8 Replacing the Display Lamps

1. Remove the back door.
2. Remove the lamp from it's holder by pushing the lamp in and turning
anticlockwise at the same time.
3. Refit the lamp by inserting it into the lamp holder then pushing the lamp in
and turning it clockwise at the same time. (Use a 24v 10w Auto lamp)
(see section 7-6 "Replacing the Ball")
Page 45