NAMCO TIME CRISIS 2 Manual Del Operador página 49

GUN INITIALIZE
SHOOT AT SCREEN
TO CHECK GUN ACCURACY
PUSH ENTER SW : ADJUST GUN SIGHT
UP SELECT SW + ENTER SW : EXIT
3. Aim the gun at the screen and pull the trigger. A white spot will
appear. If the spot appears where you aimed, the gun initialization is
O.K. If the spot is not where you aimed, press the Enter button to
initialize the gun. The following screen will be displayed.
AIM AT CENTER OF THE CROSS
AND PULL GUN TRIGGER
4. Aim the gun at the centre of the cross and pull the trigger.
5. Slide the test switch OFF to return to normal game mode.
6. Enter test mode and select 'GUN INITIALIZE' from the I/O test
screen and check the gun initialization. Repeat initialization if
necessary
(CRT)
Page 49