Replacing The Pedal Switch - NAMCO TIME CRISIS 2 Manual Del Operador

7-3 Replacing the Pedal Switch

1. Remove 4off security screw (M5x12) and remove the switch cover plate.
2. Remove 2off pozi head screw (M3x16) and remove the switch.
When replacing the switch, ensure that the wires are fitted to the correct
terminals.
3. Slacken the 2off whizztite nuts (M4) and adjust the microswitch bracket so
that the switch plunger operates the switch correctly without bending the
switch lever against the switch body.
4. Refit the switch cover plate and 4off security screw (M5x12).
Page 58