Setting The Demo Mode; Selecting The System Language; Setting The Keyboard Language With The Application For Iphone; Adjusting The Response Positions Of The Touch Panel (Touch Panel Calibration) - Pioneer AVH-X5800BHS Manual De Instrucciones

System settings
2 Touch [Camera settings].
3 Touch [Back Camera Input] to switch "On" or
"Off".
Setting the polarity of the rear view
camera
p This function is available when "Back Camera Input" is
"On".
 Refer to Setting rear view camera activation on page 41
1 Display the "System" setting screen.
 Refer to Displaying the "System" setting screen on page
41
2 Touch [Camera settings].
3 Touch [Camera Polarity].

Battery (default):
The polarity of the connected lead is positive.
 Ground:
The polarity of the connected lead is negative.

Setting the demo mode

The default setting is "On".
1 Display the "System" setting screen.
 Refer to Displaying the "System" setting screen on page
41
2 Touch [Demo Mode] to switch "On" or "Off".

Selecting the system language

 If the embedded language and the selected language setting
are not the same, text information may not display properly.
 Some characters may not be displayed properly.
1 Display the "System" setting screen.
 Refer to Displaying the "System" setting screen on page
41
2 Touch [System Language].
3 Touch the language.
After the language is selected, the previous screen returns.
42
Setting the keyboard language
with the application for iPhone
You can use the keyboard in AppRadioOne by setting the
language of the keyboard for iPhone.
p This function is only available in AppRadioOne on the
iPhone.
1 Display the "System" setting screen.
 Refer to Displaying the "System" setting screen on page
41
2 Touch [Keyboard].
3 Touch the language.
After the language is selected, the previous screen returns.
Adjusting the response posi-
tions of the touch panel (touch
panel calibration)
If you feel that the touch panel keys on the screen deviate from
the actual positions that respond to your touch, adjust the
response positions of the touch panel screen.
p This setting is available only when you stop your vehicle in a
safe place and apply the parking brake.
p Do not use sharp pointed tools such as a ballpoint or
mechanical pen, which could damage the screen.
p Do not turn off the engine while saving the adjusted position
data.
1 Display the "System" setting screen.
 Refer to Displaying the "System" setting screen on page
41
2 Touch [Touch panel calibration].
3 Touch [Yes].
4 Touch two corners of the screen along the
arrows, and then touch the centers of two +
marks at the same time twice.
5 Press .
The adjustment results are saved.
6 Press once again.
Proceed to 16-point adjustment.
7 Gently touch the center of the "+" mark dis-
played on the screen.
The target indicates the order.
 When you press , the previous adjustment posi-
tion returns.
 When you press and hold , the adjustment is
canceled.
8 Press and hold .
The adjustment results are saved.

Setting the dimmer

Setting the dimmer trigger
p This setting is available only when you stop your vehicle in a
safe place and apply the parking brake.
1 Display the "System" setting screen.
 Refer to Displaying the "System" setting screen on page
41
2 Touch [Dimmer Settings].
3 Touch [Dimmer Trigger].
4 Touch the item.
 Auto (default):
Switches the dimmer to on or off automatically according to
your vehicle's headlight turning on or off.

Manual:
Switches the dimmer to on or off manually.
 Time:
Switches the dimmer to on or off at the time you adjusted.
Setting the dimmer duration in day
or night
p You can use this function when "Dimmer Trigger" is set to
"Manual".
p This setting is available only when you stop your vehicle in a
safe place and apply the parking brake.
1 Display the "System" setting screen.
 Refer to Displaying the "System" setting screen on page
41
2 Touch [Dimmer Settings].
3 Touch [Day/Night] to switch the following
items.
 Day (default):
Turns the dimmer manually to off.

Night:
Turns the dimmer manually to on.