Using the Pre-Programmed Settings (Select Models Only)
1. Press the ON/OFF power button to turn the product on. The power light
will blink, indicating the product is active and ready to use. The light will
stay on when the motor is running.
2. Select and Press the desired Pre-Programmed Setting Button:
- "Green/Frozen Smoothie"
- "Food Chop/Salsa"
3. To change your selection, press ON/OFF twice followed by another Pre-
Programmed Setting button ("Frozen Drinks & Shakes" or "Food Chop")
4. Once the program is complete the product automatically stops. Please note:
You may press the ON/OFF button to cancel the program at any time. The
blinking bule light indicates that the blender is ready.
5. Press the ON/OFF power button to turn the product off. This product is
pre-programmed to turn off automatically if not used for a period of several
minutes. All lights will turn off when the unit automatically powers down.
Using the Manual Controls
The Manual Controls include:
Low
Med
High
Pulse
Use these controls for personal recipes or to continue blending after a
Programmed Setting is finished.
1. Press the ON/OFF power button to turn the product on. The power light
will blink, meaning the product is active and ready to use. The light will stay
on when the motor is running.
2. Put the ingredients into the jar.
3. Secure the lid and the filler cap.
High
1. Press the "High" button to run the product at a high speed.
2. Press the ON/OFF power button to turn the product off.
Medium
1. Press the "Medium" button to run the product at a medium speed.
2. Press the ON/OFF power button to turn the product off.
Low
1. Press the "Low" button to run the product at a low speed.
2. Press the ON/OFF power button to turn the product off.
Pulse
1. Verify that the blue light is blinking. This indicates that the blender is turned on.
2. Press and hold the "Pulse" button.
3. Release the pulse button to stop.
4. Press the ON/OFF power button to turn the product off.
Use pulse button to crush ice or chop food.
9