Learning About Your Product; Using Your Product - Oster VERSA 170683 Manual Del Usuario

Learning About Your Product

1. F iller Cap – Allows you to add ingredients
during use. Also, allows you to open to allow
steam to escape when blending hot foods. In
addition, it can be used as a tool to remove or
tighten the threaded jar bottom.
2. Jar lid – Seals the blender jar.
3. J ar – 8-Cup Break Resistant BPA-Free
Tritan Plastic.
TM
4. S ealing Ring – Seals the jar to the blade for
leak-proof operation.
5. B lade – Creates a forward and reverse action
when the Programmed settings are in use or
when the Reverse Blend button is pressed.
6. Threaded Jar Bottom
7. S turdy Stylish Base – Holds the jar securely.
Contains a powerful, reversible, variable
speed motor. It uses Programmed logic that
takes the guesswork out of creating foods
and drinks.
8. Control Panel
a. Power Button (On/Off button) – Turns the
product On and Off.
b. Speed Control Knob Settings – Turn knob
to "Low", "Medium" or High" speed
setting. Press knob to start or stop.
c. Programmed Settings – Use to select
"Smoothie/Frozen Drink" Button or "Dip/
Salsa" Button. Blender automatically shuts
off when cycle is finished.
d. Pulse button – Press and release to Pulse,
release the button to stop.
e. Reverse Blend Button – Press and hold to
to reverse blade action while the blender is
operating as needed. It may also be used
when the blender is not operating.
BLSTVB-103_104_13ESM1.indd 6-7
1
2
4
5
6
8
a
e
6

Using Your Product

Before you use the product for the first time, separate the lid, filler cap and blade
from the jar. Wash in warm, soapy water, or top rack in the dishwasher. Rinse
and dry well.
Blade is sharp. Handle with care.
Assembly
1. I nstall the sealing ring over the blade.
2. T urn the jar upside down and place it on a flat and stable surface.
3. T urn the blade with sealing ring upside down and place into the bottom of
the jar.
4. I nstall the threaded jar bottom over the blade assembly. Turn clockwise to
3
tighten.
B e sure the threaded jar
bottom is tightened to the jar
before using.
5. Choose a recipe from the
recipe book provided.
6. Put the ingredients into the jar.
7. Secure the lid and filler cap.
8. Slide the jar onto the base.
9. P lug the power cord into a
standard household 120/127-volt, 60 hz. AC outlet. You are now ready to
start.
Using the Programmed Settings
1. P ress the ON/OFF power button to turn the product on. The power light
will blink, meaning the product is active and ready to use. The light will stay
on when the motor is running.
2. P ress one of the two Programmed Setting buttons
7
appropriate for your recipe.
- "Smoothie/Frozen Drink" Button
- "Dip/Salsa" Button
3. T o change your selection, press knob to stop, followed
by another Programmed Setting button.
4. O nce the program is finished the product automatically stops. Please note:
You may press the knob to cancel the program at any time. The blinking red
light indicates that the blender is ready.
b
5. Press the ON/OFF power button to turn the product off.
This product is programmed to turn off automatically if not used for a period
c
of several minutes. All lights will turn off when the unit automatically powers
down.
d
7
12/13/13 9:18 AM