Transportation, Storage And Disposal - Husqvarna 530iPX Manual Del Usuario

Problem
Red error LED flash-
es.
The product does not
start.
Red error LED
comes on.
Battery
LED display
Green activate LED flashing
Error LED flashing
Error LED is lit
Battery charger
Problem
Red error LED flashes.
Red error LED comes on.
Transportation and storage
Note: Variations in temperature can lead to pressure in
the oil tank with temporary oil leakage as a result. Follow
the storage instructions.
• Clean the product and empty the oil tank before you
put the product in storage.
774 - 003 - 28.05.2019
Possible faults
Overload.
Temperature deviation.
The power trigger and the start button are
pushed at the same time.
Dirt in the battery connectors.
It is necessary to do servicing on the product. Speak to your servicing dealer.
Possible faults
Low battery voltage.
The battery is discharged.
Temperature deviation.
Cell difference is too much (1V).
Possible faults
Temperature deviation.

Transportation, storage and disposal

Possible solution
The cutting attachment is blocked. stop the
product. Remove the battery. Clean the cut-
ting attachment from unwanted materials.
Loosen the chain.
Let the product become cool.
Release the power trigger and push the start
button.
Clean the battery connectors with com-
pressed air or a soft brush.
Possible action
Charge the battery.
Charge the battery.
Use the battery in surroundings where tem-
peratures are between -10°C (14°F) and
40°C (104°F).
Contact your servicing agent.
Possible solution
Use the battery charger in tempera-
tures between 5 °C (41 °F) and 40 °C
(104 °F).
Speak to your servicing dealer.
• Put the product in a horizontal position or hung with
the bar pointed down during storage.
• Do not put the product with the bar pointed up during
storage.
• The supplied Li-ion batteries obey the Dangerous
Goods Legislation requirements.
• Obey the special requirement on package and labels
for commercial transportation, including by third
parties and forwarding agents.
23