Features; Assembly - Ryobi P501G Manual Del Operador

Sierra circular de 140 mm (5-1/2 pulg.)18 v
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

PRODUCT SPECIFICATIONS
Motor ..................................................................18 Volt DC
Blade Diameter ...................................................... 5-1/2 in.
Blade Arbor ..............................................................10 mm
KNOW YOUR CIRCULAR SAW
See Figure 1, page 15.
The safe use of this product requires an understanding of
the information on the tool and in this operator's manual as
well as a knowledge of the project you are attempting. Before
use of this product, familiarize yourself with all operating
features and safety rules.
BLADE WRENCH STORAGE
Convenient wrench storage for quick blade changes.
BEVEL ADJUSTMENT KNOB
The bevel adjustment feature allows you to make bevel cuts
from 0º to 50º.
UNPACKING
This product requires assembly.
 Carefully remove the tool and any accessories from the
box. Make sure that all items listed in the packing list are
included.
WARNING:
Do not use this product if any parts on the Packing List
are already assembled to your product when you unpack
it. Parts on this list are not assembled to the product by
the manufacturer and require customer installation. Use
of a product that may have been improperly assembled
could result in serious personal injury.
 Inspect the tool carefully to make sure no breakage or
damage occurred during shipping.
 Do not discard the packing material until you have care-
fully inspected and satisfactorily operated the tool.
 If any parts are damaged or missing, please call
1-800-525-2579 for assistance.
PACKING LIST
Circular Saw
5-1/2 in. Blade
Blade Wrench
Operator's Manual

FEATURES

Cutting Depth at 0° .............................................. 1-9/16 in.
Cutting Depth at 45° .............................................. 1-1/8 in.
No Load Speed .....................................4,400 r/min. (RPM)
LOCK-OFF BUTTON
The lock-off button reduces the possibility of accidental
starting.
SPINDLE LOCK
The spindle lock allows you to secure the blade when turn-
ing the blade screw.
SWITCH TRIGGER
The saw has a conveniently located switch trigger on the
underside of the handle.
WIDTH OF CUT SCALE
When making straight cross cuts or rip cuts, the scale can
be used to measure up to four inches to the right side of
the blade. It can be used to measure up to one inch to the
left side of the blade.

ASSEMBLY

WARNING:
If any parts are damaged or missing do not operate this
product until the parts are replaced. Use of this product
with damaged or missing parts could result in serious
personal injury.
WARNING:
Do not attempt to modify this tool or create accesso-
ries not recommended for use with this tool. Any such
alteration or modification is misuse and could result in a
hazardous condition leading to possible serious personal
injury.
WARNING:
To prevent accidental starting that could cause serious
personal injury, always remove the battery pack from the
product when assembling parts.
7 — English

Publicidad

Tabla de contenido
loading

Tabla de contenido