Locating A Disc By Name; List-Up; Selecting Specific Tracks For Playback; Bank - Sony CDX-C5850R Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Locating a disc by name

— List-up (For a CD unit with the custom
file function or an MD unit )
You can use this function for discs that have
been assigned a custom name. For more
information on disc names, refer to "Labelling
a CD" (page 24).
1
Press (PTY/LIST).
The name assigned to the current disc
appears in the display.
When you assign a disc memo label to a CD
TEXT disc, it takes priority over the original
CD TEXT information.
2
Press (PTY/LIST) repeatedly until you
find the desired disc.
3
Press (6) (ENTER) to play the disc.
Notes
• After a disc name has been displayed for five
seconds, the display returns to normal playback
mode. To turn off the display, press (DSPL).
• The track names are not displayed during MD or
CD TEXT disc playback.
• If there are no discs in the magazine, "NO DISC"
appears in the display.
• If a disc has not been assigned a custom file,
"********" appears in the display.
• If the disc information has not been read by the
unit, "NOT READ" appears in the display. To load
a disc, first press the number button, then choose
the disc that has not been loaded.
• There are also some letters which cannot be
displayed (during MD or CD TEXT disc playback).
Selecting specific tracks
for playback

— Bank

(For a CD unit with the custom file function)
If you label the disc, you can set the unit to
skip or play the tracks of your choice.
1
Start playing the disc and press (SHIFT),
then press (4) (PLAY MODE) for two
seconds.
Bank edit mode.
Note
If you have not labelled the disc, the bank edit
mode does not appear. To go back to normal
playback mode, press (SHIFT).
2
Push the SEEK/AMS control up or down
to select the track number you want to
skip and press (6) (ENTER).
The indication changes from "PLAY" to
"SKIP." To return the indication to "PLAY,"
press (6) (ENTER) again.
3
Repeat step 2 to set "PLAY" or "SKIP" for
all the tracks.
4
Press (4) (PLAY MODE) for two seconds.
The unit returns to normal CD playback
mode.
5
Press (SHIFT).
Notes
• You can set "PLAY" or "SKIP" for up to 24 tracks.
• You cannot set "SKIP" for all the tracks on a CD.
25

Publicidad

Tabla de contenido
loading

Tabla de contenido