Epson PowerLite S12+ Guia De Instalacion página 4

2
To raise the image, press the foot release button and lift the front of
the projector. Release the button to lock the foot in position.
3
PowerLite W12+: To reduce or enlarge the image, turn the zoom ring.
PowerLite S12+: To reduce or enlarge the image, press the Tele
(reduce) or Wide (enlarge) buttons on the projector.
PowerLite W12+
PowerLite S12+
4
Turn the focus ring to sharpen the image.
PowerLite W12+
PowerLite S12+
5
If your image looks like
to one side of the screen at an angle. Use the horizontal slider on the
projector to correct it. Or place the projector directly in front of the
center of the screen, facing the screen squarely.
PowerLite W12+
PowerLite S12+
6
Your projector automatically adjusts images that look like
but if necessary you can press the
to correct it.
Using the remote control
Make sure the batteries are installed as shown (two AA batteries).
Turn projector
on and off
Access projector
menus
Turn off projector
display
For more information on using the remote control, see the online
User's Guide.
or , you've placed the projector off
or button on the projector
Choose which
source to display
Navigate projector
menus
Get solutions to
common problems
Troubleshooting
If you see a blank screen or the No signal message after turning on your
computer or video device, check the following:
•
Make sure the power light on the projector is green and not flashing,
and the A/V Mute slide is open.
•
Press the Source Search button on the projector or the remote control
to switch to the correct image source, if necessary.
•
If you're using a Windows laptop, press the function key on your
keyboard that lets you display on an external monitor. It may be labeled
CRT/LCD or have an icon such as
Fn key while pressing it (such as Fn + F7). Wait a moment for the display
to appear.
•
If you're using a Mac
Displays. Select the VGA Display or Color LCD option if necessary,
then click the Arrange or Arrangement tab, and select the Mirror
Displays check box.
Where to get help
Manual
For more information about using the projector, click the icon on your desktop
to access the online User's Guide (requires an Internet connection). If you don't
have a User's Guide icon, you can install it from the projector CD or go to the
Epson website, as described below.
Telephone Support Services
You may speak with a projector support specialist by dialing:
Argentina (54 11) 5167-0300
Chile (56 2) 484-3400
Colombia (57 1) 523-5000
Costa Rica 800-377-6627
Ecuador (593 4) 604-4220
Toll or long distance charges may apply. If your country does not appear
above, contact the Epson sales office in the nearest country.
or ,
Internet Support
Visit www.latin.epson.com for solutions to common problems (website
available only in Spanish and Portuguese). You can download utilities and
documentation, get FAQs and troubleshooting advice, or e-mail Epson.
Epson is a registered trademark and Epson Exceed Your Vision is a registered logomark of Seiko Epson
Corporation. PowerLite is a registered trademark of Epson America, Inc.
General Notice: Other product names used herein are for identification purposes only and may be trademarks of
their respective owners. Epson disclaims any and all rights in those marks.
This information is subject to change without notice.
© 2011 Epson America, Inc. 5/11
Printed in XXXXXX
. You may have to hold down the
laptop, open System Preferences and select
®
Mexico 1-800-087-1080
Mexico City (52 55) 1323-2052
Peru 0800-10126
Lima (51 1) 418-0210
Uruguay 00040-5210067
Venezuela (58 212) 240-1111