Downloading The Results; Data Transmission Via Bluetooth - Fora Test N'GO Advance Pro Manual Del Propietário

DOWNLOADING THE RESULTS

Data Transmission via Bluetooth

You can transmit your measurement data from the meter to an App on
your mobile device via Bluetooth signal. Please note that you must first
pair your meter to your mobile device before attempting to transmit any
data. Please contact customer service or the place of purchase for
further assistance.
Pairing with your mobile device
1. Start with the meter switched off. Insert a test strip to turn on the
meter. Wait for the screen displays" " and the Bluetooth indicator
starts to flash. Remove and dispose of the test strip. You can also
activate Bluetooth function by entering Memory Mode when
memory is not empty. Press and release the M to enter the memory
mode then the Bluetooth indicator will flash.
2. On your mobile device, turn on the Bluetooth function and follow
the instruction on the App to pair the device (e.g., Search for meter,
and Pair).
3. After successfully pairing the App to your meter, the Bluetooth
function on the meter will then start to transmit the data to your
App.
Bluetooth indicator on the meter
BLUETOOTH INDICATOR
Flashing Blue
Solid Blue
The Bluetooth function is enabled and
waiting for connection.
The Bluetooth connection is established.
STATUS
23