Test Strip - Fora Test N'GO Advance Pro Manual Del Propietário

Test Strip

NOTE:
 The FORA Test N'GO Advance
only be used with FORA Test N'GO Advance Pro
strips with this monitoring system can produce inaccurate results.
1. Absorbent Hole
Apply a drop of blood here. The blood will be
automatically absorbed.
2. Confirmation Window
This is where you confirm if enough blood has
been applied to the absorbent hole in the strip.
3. Test Strip Handle
Hold this part to insert the test strip into the
meter slot.
4. Contact Bars
Insert this end of the test strip into the meter.
Push it in firmly until it stops.
ATTENTION:
The front side of test strip should face up when
inserting test strip.
Test results might be wrong if the contact bar is not fully
inserted into the test slot.
Pro Multi-Functional Monitoring System should
Test Strips. Using other test
7