MAINTENANCE
Battery
Your meter comes with two 1.5V AAA size alkaline batteries.
Low Battery Signal
The meter will display the message below to alert you when the meter
power is getting low.
Replacing the Battery
To replace the batteries, make sure that the meter is turned off.
1. Remove the battery cover.
2. Remove the old batteries and replace with two 1.5V AAA size alkaline
batteries.
3. Close the battery cover, paying close attention to the polarity of the
batteries. (If the batteries are inserted correctly, you will hear a "beep").
NOTE:
• Replacing the batteries does not affect the test results stored in the memory.
The " " appears with E-b and low:
The power is not enough to perform testing. Please
change the batteries immediately.
29