Kenwood DDX9906XR Guia De Inicio Rapido página 29

● DDX819WBTL
Connect to the vehicle's
parking brake detection switch
harness.
PRK SW
For best safety, be sure to
connect the parking sensor.
Purple/White
(Reverse sensor wire) (2 m)
REVERSE
Connect to vehicle's reverse lamp harness when
using the optional rear view camera.
Pin Color and function
A1 Orange/White Dimmer
A2 Yellow
A4 Red
A5 Blue
[1]
A6 Black
A8/A7 White (+) / White/Black (–)
A10/A9 Gray (+) / Gray/Black (–)
B2/B1 Green (+) / Green/Black (–)
B6/B5 Purple (+) / Purple/Black (–) Rear Right
C5 Blue
*Speaker Impedance: 4-8 Ω
Max. 300mA, 12V
[1]
When using Antenna Control, connect the ANT CONT
[2]
lead (blue) to A5 (blue) on the wiring harness.
Fuse (15A)
Light Green
(Parking sensor wire)
(2 m)
Battery
Ignition (ACC)
Antenna control
Earth (Ground) Connection
Front Left
Front Right
Rear Left
Antenna control
Accessory 1
If no connections are made, do not let
the cable come out from the tab.
Blue/White
(Power control wire)
When using the optional power amplifier, connect to
its power control terminal. (Max. 350mA, 12V)
A5
Connect to vehicle's harness.
Accessory !
ANT CONT
Connect to vehicle's harness.
Connection/Installation
P. CONT
[2]
C5
English
29