HP SCANJET ENTERPRISE 9000 Guía De Instalación Inicial página 16

Chapter 2
• To prevent skewing, always load stacks of documents of the same dimensions.
However, if you must load stacks of mixed document sizes, center all documents in
the stack by width before inserting them in the document feeder.
• Clean the scanning rollers if the rollers are visibly dirty or after scanning a document
that has pencil writing on it.
Load documents
1. Pull up the document feeder extension and adjust the output tray to the size and
leading edge orientation ( or
not extend beyond the surface on which the scanner sits.
2. Adjust the paper guides to the width of the documents, based upon the orientation
you are loading the document ( or
12 HP Scanjet Enterprise 9000 Scanner
) of the document. Ensure that the output tray does
). To adjust the paper guides outward, pull down