Klarstein Height Cool Manual De Instrucciones página 21

8
Refit the bracket fitting the
bottom hinge pin. Replace
both adjustable feet.
Transfer the lower door to
the property position.
9
Make the middle
hinge reverse the
direction180oC, then
transfer it to the left
property position. Make
the middle hinge pin in the
upper hole of the lower
door, then tight the bolts.
11
Put the top cover and then screw back.
10
Place the upper door back
on. Ensure the door is
aligned horizontally and
vertically so that the seal
are closed on all sides
before finally tightening
the top hinge. Then inert
the hinge and screw it to
the top of the unit.
EN
21