Control Panel And Features - Kenmore 110.2813 410 Serie Manual De Uso Y Cuidado

Lavadora de alto rendimiento y carga superior, con nivel bajo de agua
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

STEAM MODEL
NON-STEAM MODEL
NOTE: The control panel features a sensitive surface that responds to a light touch of your finger. To ensure your selections are registered,
touch the control panel with your finger tip, not your fingernail. When selecting a setting or option, simply touch its name until the
desired section is illuminated�
POWER BUTTON
1
Touch to turn the washer ON� Touch to stop/cancel a cycle at
any time�
WASH CYCLE KNOB
2
Turn the Wash Cycle knob to select a cycle for your laundry
load� See "Cycle Guide" for detailed descriptions of cycles�
TIME DISPLAY
3
The Estimated Time Remaining display shows the time
required for the cycle to complete� Factors such as load
size and water pressure may affect the time shown in the
display� Overloading, unbalanced loads, or excessive suds
may cause the washer to adjust the cycle time, as well�
DELAY WASH
4
Use "+" and "–" to delay the start of the wash cycle by up
to 12 hours. To turn off Delay Wash, use "+" and "–" to set
the delay time to "0," or touch POWER�
START/PAUSE/UNLOCK LID BUTTON
5
Touch and hold START/PAUSE button for up to 3 seconds
or until the washer starts to begin the selected cycle; touch
again to pause a cycle�
NOTE: If the washer is spinning, it may take several minutes
to unlock the lid�
4

CONTROL PANEL AND FEATURES

1
2
1
2
Not all features and cycles are available on all models�
3
4
5
3
4
5
CYCLE MODIFIERS
6
When you select a cycle, its default settings will light up�
WASH TEMP
Wash Temp control senses and maintains uniform water
temperatures by regulating incoming hot and cold water�
Select a wash temperature based on the type of fabric
and soils being washed� For best results and following the
garment label instructions, use the warmest wash water
safe for your fabric�
• On some models and cycles, warm and hot water may
be cooler than what your previous washer�
• Even for cold wash settings, some warm water may
be added to the washer to maintain a minimum
temperature�
SOIL LEVEL
Select the most suitable setting for your load� For heavily
soiled items, select Ex Heavy Soil Level for more wash
time� For lightly soiled items, select Light Soil Level for
less wash time�
Lighter soil level setting will help reduce tangling and
wrinkling�
SPIN SPEED
This washer automatically selects the spin speed based
on the cycle selected� The preset speeds can be changed�
Not all spin speeds are available with all cycles�
• Faster spin speeds mean shorter dry times, but may
increase wrinkling in your load�
• Slower spin speeds mean less wrinkling, but will leave
your load more damp�
6
7
8
6
7
8

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

110.2913 410 serie

Tabla de contenido