Best WC46 Manual Del Usuario página 14

DUCTED INSTALLATION ONLY
Note: Rooms with 10 or 11 foot ceiling
require flue extension model
AEWC345IQSB, available from your
local dealer. Discard the upper flue
supplied with the range hood and
replace it with thw longer flue extension.
1. Remove protective tape from blower outlet
before installing damper to hood with (4)
screws supplied and tape joint with
aluminum duct tape (Fig.14).
2. Run 8-inch diameter metal ductwork to the
outside location.
3. Install an appropriate wall or roof cap with
damper to exhaust the air to the outside.
4. Tape all duct joints with aluminum duct
tape.
5. Plug power cord into wall outlet (Fig.15).
6. Install upper and lower decorative flues
onto the range hood.
- Vents are concealed on 8-foot ceilings.
- Vents maybe exposed on 9-foot ceilings.
7. Secure upper flue to flue mounting bracket
with (2) 3.9 x 6 mm screws (Fig.16).
CEILING
CONCEALED
VENTS
8-INCH DIA.
METAL DUCT
DAMPER / DUCT
CONNECTOR
3.9 x 6 mm
SCREWS
FIG. 15
- 14 -
FIG. 14
FIG. 16