Extension Cords - Bosch JS572E Instrucciones De Funcionamiento Y Seguridad

BM 2609932805 12-11:BM 2609932805 12-11.qxp 12/6/11 8:43 AM Page 13
Cleaning
To avoid accidents always
WARNING
disconnect the tool from
the power supply before cleaning or
performing any maintenance. The tool may
be cleaned most effectively with compressed
dry air. Always wear safety goggles when
cleaning tools with compressed air.
Ventilation openings and switch levers must
be kept clean and free of foreign matter. Do
not attempt to clean by inserting pointed
objects through openings.
If an extension cord is
WARNING
necessary, a cord with
adequate size conductors that is capable
of carrying the current necessary for your
tool must be used. This will prevent
excessive voltage drop, loss of power or
overheating. Grounded tools must use 3-wire
extension cords that have 3-prong plugs and
receptacles
.
NOTE: The smaller the gauge number, the
heavier the cord.
** Steel overshoe
* Anti splinter insert
* T-shank jigsaw blade
** Dust extraction kit, includes dust shroud,
extraction tube, and vacuum hose
adapter.
** Vacuum hoses
** Circle and parallel cutting guide
plastic parts. Some of these are: gasoline,
carbon tetrachloride, chlorinated cleaning
solvents, ammonia and household detergents
that contain ammonia.

Extension Cords

Accessories & Attachments
** Jigsaw guiderail system and attachments
** Carrying case
** Other T-shank jigsaw blades
(*= standard equipment)
(**= optional accessories)
-13-
Certain cleaning agents
CAUTION
and solvents
RECOMMENDED SIZES OF EXTENSION CORDS
120 VOLT ALTERNATING CURRENT TOOLS
Cord Size in A.W.G.
Tool's
Ampere
Cord Length in Feet
Rating
25 50 100 150
3-6 18 16 16
6-8 18 16 14
8-10
18 16 14
10-12 16 16 14
12-16 14 12 — —
damage
2
Wire Sizes in mm
Cord Length in Meters
15 30 60 120
14 0.75 0.75 1.5 2.5
12 0.75 1.0 2.5 4.0
12 0.75 1.0 2.5 4.0
12 1.0 2.5 4.0 —
— — — —