Dust Extraction - Bosch JS572E Instrucciones De Funcionamiento Y Seguridad

BM 2609932805 12-11:BM 2609932805 12-11.qxp 12/6/11 8:43 AM Page 8
BLADE INSTALLATION AND REMOVAL
This jigsaw is equipped with a Bosch tool-less
blade changing system for fast and easy
changes of T-shank blades.
Note: This jigsaw does not accept U-shank
blades.
If blade is not properly
WARNING
installed, then the blade may
unexpectedly dislodge from jigsaw when tool is
energized.
1. To remove a previously-used blade, pull
blade change lever until blade ejects (Fig. 2).
Blade ejects forcefully when
WARNING
released. Direct away from
yourself or bystanders.
2. Pull the blade change lever to the point that
the notch on the blade clamp's ring line up with
the slot in the center of the clamp (Fig. 2).
3. Insert the saw blade (teeth in cutting
direction) until it the "T" part of the blade shank
is completely inserted in to the blade clamp.
(When inserting the saw blade, the back of the
blade must rest in the grooves in double roller
guide Fig. 2a.)
4. When blade change lever is released, it will
spring back to its closed position.
DOUBLE ROLLER
GUIDE
BLADE
FIG. 2a
BLADE
Assembly
BLADE
CHANGE
LEVER
FIG. 2
NOTCH
BLADE
CLAMP
RING
BLADE CHANGE
LEVER
-8-
5. Verify that the blade clamp has also
returned to its closed position (which is the
point where slots were previously).
Note: If the saw blade cannot be inserted into
the plunger, the slots of the blade holder are
not in the correct position.

DUST EXTRACTION

(Not included, sold separately)
The JA1007 Dust Extraction Kit includes a
dust shroud and an extraction tube for
connecting the jigsaw to a vacuum hose or
vacuum hose adapter.
Note: The dust shroud must be used when the
extraction tube is connected to a vacuum
cleaner system.
To use this feature, insert extraction tube into
footplate. (Fig. 3).
For vacuuming, a Bosch Air Sweep vacuum
hose or hose adapter (sold separately) can be
directly connected to the extraction tube
(Fig. 3).
FIG. 3
DUST SHROUD
(Not included,
sold separately)
EXTRACTION TUBE
(Not included, sold separately)
VAC024 ADAPTER
(Not included, sold separately)
SLOT
VACUUM HOSE
(Not included,
sold separately)