Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
display, and then "--".
5. When the time is set, it will begin to count down immediately.
The display will show the remaining time and the timer indicator
flash for 5 seconds.
NOTE: The red dot next to power level indicator will illuminate
indicating that zone is selected.
6. When cooking timer expires, the corresponding
cooking zone will be automatically switch off and
show "H".
Other cooking zone will keep operating if they are turned on previously.
Setting the timer to turn more than one cooking zone
off
1. If use this function to more than one heating zone, the timer indicator will show
the shortest time.
(e.g. zone 1# setting time of 3 minutes, zone 2# setting time of 6 minutes,
the timer indicator shows "3".)
NOTE: The flashing red dot next to power level indicator means the timer
indicator is showing time of the heating zone.
If you want to check the set time of other heating zone, touch the heating
zone slide control one time. The timer will indicate its set time.
2. When cooking timer expires, the corresponding heating zone will
be automatically switch off and show "H".
NOTE: If you want to change the time after the timer is set, you
have to start from step 1
(set to 6 minutes)
(set to 3 minutes)
EN-18
Publicidad
Tabla de contenido
