Remote Start - Thermador PRD304WHC/U Guía De Uso Y Cuidado

Ocultar thumbs Ver también para PRD304WHC/U:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

During this time the user can adjust the
parameters. After the countdown the oven starts
heating. All buttons are disabled.
Sabbath
TIMERS SETTINGS ENTER
After the countdown is completed a notification
appears.
completed
TIMERS SETTINGS ENTER
8. Turn knobs to OFF.
To cancel Sabbath
1. Turn the temperature selector and the function
selector to OFF to cancel the appliance operation.
To set extended bake on models without a digital
display
1. Turn the mode knob to EXTEND BAKE.
2. Turn the temperature knob to desired temp.
Preheating phase is the same as for other bake
modes.
Once the oven is preheated to the selected
temperature, a 22 minute extended bake cycle
begins. Baking is as usual for 19 minutes.
During the last 2 minutes, the oven on and preheating
lights blink slowly to serve as a notice for the final
phase. Once the two lights stop blinking (both
remaining on), the final 3 minutes allows the Sabbath
user access to the oven without effecting a change in
the operation of the range. Heating elements remain
off during this phase.
06:31
24h 59min
Sabbath

Remote start

About remote start
Remote start allows you to start, pause, and abort oven
programs remotely via the Home Connect
mobile device.
The remote start can only be employed if the Home
Connect app has been successfully installed on a mobile
device. See the section "Setting up Home Connect™" on
page 54 for instructions on how to install the Home
Connect app.
If the appliance is not connected to the home network,
the appliance functions in the same way as an oven with
no network connection and can still be operated via the
appliance.
The availability of the Home Connect function depends on
the availability of Home Connect services in your country.
Home Connect services are not available in every country.
You can find more information on this at www.home-
connect.com
Some operating modes can only be started on the oven
itself.
Remote start is automatically deactivated in the
following situations:
The oven door is opened 15 minutes after remote
start is activated.
The oven door is opened 15 minutes after the oven
operation has ended.
24 hours after remote start has been activated.
IMPORTANT:
Ensure that you follow the safety instructions in this
instruction manual and that you comply with these
even when you are away from home and are operating
the appliance via the Home Connect app. You must
also follow the instructions in the Home Connect app.
Operating the appliance directly from the appliance
always has priority. During this time, it is not possible
to operate the appliance using the Home Connect
app.
We are constantly working to improve the Home
Connect app, which may lead to differences in the
setup steps. Please rely on the instructions in the
latest version of the Home Connect app to guide you
through the setup process.
TM
app on a
Page. 37

Publicidad

Tabla de contenido
loading

Tabla de contenido