Assembly & Operation - Worx WG291 Manual Del Usario

OPERATING INSTRUCTIONS
NOTE: Before using the tool, read the
instruction book carefully.
ASSEMBLY & OPERATION
ACTION
ASSEMBLY
Assembling the Safety Guard
Assembling the Front Handle
Installing and Removing the
battery park
Checking the battery charge
condition
Charging the battery pack
More details can be found in
WA3859's manual
OPERATION
Starting and stopping
HOW TO USE YOUR HEDGE
TRIMMER
Top cutting
Side cutting
Lubricating the cutting blade
To store your hedge trimmer
HOW TO USE YOUR HEDGE TRIMMER
(See Fig. F1, F2, F3)
Allow the cutting blades to reach full speed
before cutting. When operating, keep the
cutting blades away from people and objects
such as walls, large stones, trees, vehicles, etc.
If the blade stalls, immediately stop the
trimmer. Release the two Switch Levers (5 & 2)
before attempting to clear jammed debris from
the cutting blades.
Do not attempt to cut stems that are too thick
for the cutting blade.
Cordless Hedge Trimmer
TOP CUTTING
Use a wide sweeping motion (See Fig. F1). A
slight downward tilt of the cutting blades in
the direction of motion gives the best cutting
results.
SIDE CUTTING
When trimming the sides of the hedge, begin
FIGURE
at the bottom and cut upwards (See Fig. F2,
F3), tapering the hedge inward at the top. This
shape will expose more of the hedge, resulting
See Fig. A
in a more uniformed growth.
See Fig.
B1,B2
CLEANING
See Fig. C1,
C2
REMOVE THE BATTERY PACK (3). Use a soft
brush to remove debris from all air intakes and
See Fig. D1
cutting blade.
Wipe the surface with a dry cloth.
See Fig. D2
trimmer. Do not clean with chemicals,
including petrol, or solvents as this may
damage your trimmer.
See Fig. E1,
E2, E3
TO STORE YOUR HEDGE TRIMMER
Clean your trimmer thoroughly.
Check that all nuts and bolts are secure.
Visually inspect the trimmer for any worn or
See Fig. F1
damaged parts.
See Fig. F2,
Ensure the blade sheath is fitted before
F3
storage.
Store in a dry place where your trimmer can
See Fig. G
be protected from damage.
See Fig. H
MAINTENANCE
Remove battery from the socket before
carrying out any adjustment, servicing or
maintenance.
There are no user serviceable parts in your
power tool. Never use water or chemical
cleaners to clean your power tool. Wipe clean
with a dry cloth. Always store your power tool
in a dry place. Keep the motor ventilation slots
clean. Keep all working controls free of dust.
WARNING:
Never use water for cleaning your
13
EN