Luminance Brands Kathy Ireland Home EUCLID CF500AP00 El Manual Del Propietario página 6

3. Ceiling Fan Assembly
3.3
Remove One #8-32 x 3/8" Round Head Screw with
Lockwasher from the Motor Hub and retain for later
use .
Loosen the other Two #8-32 x 3/8" Round Head
Screws with Lockwashers on the Motor Hub for the
installation of the Switch Housing Adapter .
Place the Motor Hub Connectors through the center
Hole of the Switch Housing Adapter .
Place the Switch Housing Adapter onto the Motor Hub,
aligning the Three Screw Holes (Figure 3) .
Rotate the Switch Housing Adapter Key Hole Slots
Clockwise to engage both loosened Screws (Figure 3) .
Reinstall the previous removed #8-32 x 3/8" Round
Head Screw with Lockwasher .
Secure the Switch Housing Adapter to the Motor Hub
by tightening the Three Switch Housing Screws .
3.4
Tuck all the Wires and Wire Connectors into the Switch
Housing Adapter .
Remove the Three #8-32 x 5/16" Flat Head Screws from
the Switch Housing Adapter and retain for the installation
of the Switch Housing Cover .
Align the Three Screw Holes of the Switch Housing
Cover onto the Switch Housing Adapter (Figure 4) .
Reinstall the previous removed #8-32 x 5/16" Flat Head
Screws .
Secure the Switch Housing Cover to the Switch Housing
Adapter by tightening the Three Switch Housing Screws
(Figure 4) .
A spare #8-32 x 5/16" Flat Head Screw supplied in parts
bag, if needed .
The Finial may be removed for use with an Luminance
Brands Light Kit .
(Continued)
ROTATE ADAPTER
CLOCKWISE
Figure 3
#8-32 x 5/16" FLAT
HEAD SCREWS (3)
Figure 4
6
#8-32 x 3/8"
ROUND HEAD SCREW
WITH LOCKWASHER
SWITCH HOUSING
ADAPTER
SWITCH HOUSING COVER
FINIAL
SWITCH HOUSING ADAPTER
U.L. Model No.: CF500