Luminance Brands Kathy Ireland Home EUCLID CF500AP00 El Manual Del Propietario página 8

3. Ceiling Fan Assembly
3.8
Align the Clevis Pin Holes in the Downrod with the
Holes in the Motor Coupler .
Install the Clevis Pin and secure with the Hairpin Clip
(Figure 8) .
The Clevis Pin must go through the Holes in the Motor
Coupler . It is critical that the Clevis Pin in the Motor
Coupler is properly installed and securely tightened .
Retighten the Two Phillips Head Set Screws to secure
the Downrod to the Motor (Figure 8) .
WARNING
!
It is critical that the clevis pin and setscrews in the
motor coupler are properly installed and securely
tightened. Failure to verify that the pin and setscrews
are properly installed could result in the fan falling.
3.9
Make sure the Grommet is properly installed in the
Coupler Cover, then slide the Coupler Cover on the
Downrod until it rests on the Motor Housing (Figure 9) .
3.10
Place the Ceiling Cover over the Downrod (Figure 10) .
Be sure that the Ceiling Cover and the Coupler Cover
are both oriented correctly (Figure 10) .
(Continued)
HAIRPIN
CLIP
CLEVIS
PIN
CLEVIS
PIN
Figure 8
COUPLER COVER
COUPLING COVER
GROMMET
GROMMET
Figure 9
CEILING
COVER
Figure 10
8
MOTOR
MOTOR
COUPLING COUPLER
HAIRPIN
CLIP
RETIGHTEN
PHILLIPS HEAD
SET SCREW (2)
4.5" DOWNROD
COUPLER
COUPLING
COVER
COVER
MOTOR
HOUSING
4.5" DOWNROD
U.L. Model No.: CF500