SEVERIN KA 4826 Instrucciones De Uso página 16

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 39
Overview and parts included
1. Lid for water container
2. Water level indicator
3. Swing-out filter with removable filter
insert
4. Jug with aroma protection lid
5. Hot-plate
6. On/Off button
7. Programme button
8. Indicator lights
9. Rating label (on underside)
10. Minute set button
11. Hour set button
12. Power cord with plug
13. Cable storage space (at the rear)
Models with aroma selection switch
14. Aroma selection switch
Before using for the first time
∙ Unpack the appliance completely and
remove all packaging materials and
stickers.
∙ Clean the jug and filter insert as
described in the section Cleaning and
care.
∙ Set the time as described in Setting the
time.
∙ Before making coffee for the first time,
let the appliance go through two or
three filtration cycles using the indicated
maximum amount of cold water, but
without using ground coffee.
∙ This should also be done if the appliance
has not been used for an extended
period of time, and after descaling.
16
Display information
The display shows the current time, the
timer setting and the following programme
functions:
Clock
The current time can be set (see
'Setting the time')
Timer
The desired time to activate the
brewing process by timer can be
set (see 'Timer')
Descale The appliance needs descaling
(see 'Cleaning and care /
Descaling')
Automatic switch-off
To save energy, the appliance (including
the hot-plate) will switch itself off
automatically about 35 minutes after the
brewing cycle is complete.
Power-cord storage compartment
The integrated power-cord storage
compartment at the rear is used for storing
the power cord.
The recess at the bottom facilitates limiting
the length of the power cord.
Making coffee - general information
∙ The measuring scales on the water
container and glass jug help measuring
the correct amount of clean water. The
left scales are used for standard-sized
cups of approx.125ml, the right scales
for smaller cups.
∙ Make sure that the indicated maximum
amount of water or number of cups is not
exceeded.
∙ If several consecutive brewing cycles
are required, switch off the coffee maker
after each cycle and let the appliance
cool down for approx. 5 minutes.

Publicidad

Tabla de contenido
loading

Tabla de contenido