BOREAL E4000 Serie Instrucciones De Instalación, Uso Y Mantenimiento página 18

Rear air intake
Baffle plate
The baffle plate is a fundamental part for the proper operation of the stove. It must be placed in the right position and the stove must not be used without
the baffle plate. This would invalidate the warranty.
WARNING!
The lack of the baffle plate causes an excessive draft. This causes a fast combustion, excessive wood consumption and the overheating of the
equipment.
Due to safety reasons during the transport, the baffle plate is not assembled. You will find it inside the combustion chamber. To place it properly, follow
the next steps:
Frontal models
The baffle plate must be rested on the side supports of the combustion chamber.
Barbecue grill
It's an accessory that is included in some models. It can be adjusted to be used with two different heights depending on the side guide that we use.
The oven of the models of the series EH7000 includes a barbecue grill which rests directly on the oven base.
In order to avoid the damage of the tray, it is recommended to extract it outside the oven when it is not being used.
Oven
The stoves from the series EH7000 include on the top of the stove an oven with a hermetic chamber.
Heating is produced by a direct heat transmission from the oven base. On the top of the oven there is one pipe that connects the cooking chamber with
the smoke outlet in order to remove the gas generated inside the oven.
The oven has the following components:
- Thermometer
WARNING!! The thermometer shows the cooking temperature of the oven, it never shows the combustion chamber temperature
The maximum cooking temperature for the oven is 200-230ºC. If the thermometer shows that the oven reaches a higher temperature, this means that the
equipment has been overloaded and this will invalidate the warranty.
Double Combustion
Corner models
EN
17