RIB PREMIER 24V Manual Del Usuario página 35

FIXING THE OPERATOR TO THE PILLAR (D)
In order to carry out a proper installation of the operator, it is necessary to comply with the geometry measurement shown in the tables in Pic. 6 and 8.
X
138
80
80 98
D
ASSEMBLING DRIVE ARM WITH THE ANTI-THEFT LOCKING
DEVICE (E)
Assemble the arms as shown in Pic. 5.
Caution: Once the screws V and W have been thoroughly tightened (Pic.
5) unscrew them for half a turn, in order to guarantee a free movement
of the arm.
After assembling the arm, unlock the motor and fix the arm to the motor
with the supplied screw and M8 washer.
With the gate in closing position and the motor at rest, the anti-theft lock
(E) keeps the gate leaves securely closed and prevents anybody from
FIXING THE DRIVE ARM WITH THE ANTI-THEFT LOCKING DEVICE (E)
Unlock the operator.
Caution: start the operation with the gate in closing position. Straighten the levers until the anti-theft lock (E Pic. 5) is engaged and stressed. Move the levers back a little bit just enough to avoid
keeping the anti-theft locking in working position (stressed) every time the gate will close.
A max A max*
α°
90 140 190 60
90 200 200 70
90 205 205 80
90 225 225 90
90 - 240 110
95 0 0 70
100 0 0 90
105 0 0 110
110 0 0 155
A max* - In case only one mechanical stopper is used in opening (Pic. 8)
13
forcing the gate leaves open.
X B I T sec
130 300 20
140 270 19
150 230 18
160 135 16
180 0 15
140 284 18
160 302 19
180 315 19
19
225 322
E
B
X
A
I
35
V
W
DRL8x17I
DRL10x20I
DRG6I
DRL8x17I
α
G
B
4
DRL8x17I
5
6