Placement Of The Air Compressor - Husky F2S20VWD Guía De Uso Y Cuidado

Ocultar thumbs Ver también para F2S20VWD:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Pre-Operation (continued)

PLACEMENT OF THE AIR COMPRESSOR

WARNING: If any parts are damaged or missing do
not operate this product until the parts are replaced.
Failure to heed this warning could result in serious
personal injury.
CAUTION: Do not use in an environment that
CAUTION: Do not use in an environment that is dusty
is dusty or otherwise contaminated. Using the
or otherwise contaminated. Using the air compressor
air compressor in this type of environment may
in this type of environment may cause damage to
the unit.
cause damage to the unit.
NOTICE: Long lengths of electrical wiring could cause power loss
to the motor.
Place the air compressor in a clean, dry, and well
ventilated area.
The air compressor must be positioned at least
18 in. (0.5 m) away from the wall or other
obstructions that will interfere with the flow of air.
Locate the air compressor as close to the main
power supply as possible to avoid using long
lengths of electrical wiring.
The air filter must be kept clear of obstructions
which could reduce the air flow to the air
compressor.
10
18 in.
(0.5 m)

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

F2s20vwdvp1.caF2s26vwdvp1.ca947 2651000 654 5481000 654 549

Tabla de contenido