Dymo XTL 500 Guia De Inicio Rapido página 13

Safety Precautions for Lithium Polymer Battery
Battery Type: LiPolymer 14.8V 2000mAh 29.6Wh
Inaccurate handling of a lithium polymer rechargeable battery may cause leakage, heat,
smoke, an explosion, or fire. This could cause deterioration of performance or failure. This
may also damage the protection device installed in the battery. This could damage
equipment or injure users. Thoroughly follow the instructions below.
While Charging the Battery
To reduce the risks associated with fire and explosion, which if not avoided,
could result in serious injury or death:

Danger of explosion if a battery is incorrectly handled, charged, disposed or
replaced. Replace only with the same or equivalent type recommended by DYMO.

When charging the battery, use only the power adapter provided and follow the
instructions in this guide.

Do not connect directly to an electric outlet or cigarette lighter charger.
DANGER

Do not store the battery close to fire or at extremely high temperatures over 140°F
(60°C) (for example, a vehicle, strong direct sunlight).

Do not short-circuit the batteries under any circumstances.

Never charge batteries near highly flammable objects.
To reduce the risks associated with fire and explosion, which if not avoided,
could result in serious injury or death and/or property damage:

Stop charging the battery if charging is not completed within the specified time.

Never leave the battery unattended during charging. Do not attempt to charge a
battery that is damaged.

Immediately remove the battery from the device or battery charger and stop use if
the battery gives off an odor, generates heat, becomes discolored or deformed, or
in any way appears abnormal during use.
WARNING
Pinch and
pull up
11